Phenylboronic acid-functionalized cross-linked chitosan magnetic adsorbents for the magnetic solid-phase extraction of benzoylurea pesticides

In this study, a 4-formylphenylboronic acid-modified cross-linked chitosan magnetic nanoparticle (FPBA@CCHS@Fe₃O₄) was fabricated. The synthesized material was utilized as the magnetic solid-phase extraction adsorbent for the enrichment of six benzoylurea pesticides. In addition to B-N coordination, FPBA@CCHS@Fe₃O₄ interacts with benzoylureas through hydrogen bonds and π-π stacking interaction on account of rich active groups (amino and hydroxyl) and aromatic rings in structure. Compared to traditional extraction methods, less adsorbent (20 mg) and reduced extraction time (3 min) were achieved. The adsorbent also exhibited good reusability (no less than 10 times). Coupled with a high-performance liquid chromatography–diode array detector, satisfactory recoveries (89.1–103.9%) and an acceptable limit of detection (0.2–0.7 μg/L) were obtained. Under optimized conditions, the established method was successfully applied to the tea infusion samples from six major tea categories with acceptable recoveries ranging from 76.8 to 110%, indicating its application potential for the quantitative detection of pesticides in complex matrices.     

A review on key aspects of wet granulation process for continuous pharmaceutical manufacturing of solid dosage oral formulations

Wet granulation process is a major unit operation in production of pharmaceuticals as solid dosage oral formulation. Indeed, granulation is used to improve the formulation properties such as flowability, compressibility, and so on for pharmaceutical manufacturing. Different types of granulations can be used in pharmaceutical manufacturing in which the selection of proper process depends on the operational conditions as well as formulation properties. In current decades, twin-screw wet granulation has been of paramount interest owing to its superior properties. Pharmaceutical manufacturing industry are trying to move towards continuous mode by which the efficiency can be improved compared to the batch mode. Therefore, development of continuous granulation process is of great importance. In this review article, various processing units applicable for wet granulation of pharmaceutical formulations for solid dosage forms are reviewed and discussed. The advantages and disadvantages of the processes are discussed and listed along with modeling approaches for simulation of process. The governing models and numerical schemes applicable for design of wet granulation are also critically discussed. The main focus is on wet granulation as this method has attracted much attention in pharmaceutical processing.     

Utilization of photocatalysts in decarboxylative coupling of carboxylic N-hydroxyphthalimide (NHPI) esters

Recently, the visible-light photoredox decarboxylative couplings of N-(acyloxy)phthalimides (NHPI esters) and its derivatives have become an efficient chemical transformation. Under visible light, the NHPI esters undergo a single-electron transfer (SET) process to afford the corresponding carbon or nitrogen radicals that participate in many chemical transformations. The photoredox decarboxylative couplings have been applied to achieve construction of an array of carbon–carbon and carbon–heteroatom bonds as well as the synthesis of carbocycles and heterocycles. This review categorises photocatalysts, discusses the application and catalysis mechanisms of NHPI esters, and details recent progress in this field.     

Span 80 effect on the solvent extraction for heavy oil recovery

In this study, we used the Span 80 to enhance solvent extraction process, and we explored the mechanism. The results indicated different solvents would obtain different oil recovery, and toluene showed the optimal oil recovery, and the n-heptane showed the lowest oil recovery. The complex solvents could improve oil recovery. Toluene could make the heavy oil show the lowest viscosity (89.6 Pa.S), and n-heptane make the heavy oil show the highest viscosity (176.3 Pa.S). Complex solvents could decrease the heavy oil viscosities. The higher C/H was, the higher heavy oil recovery was, and when the asphaltene and resins content increase, the C/H would increase. The C/H showed the highest value (9.09, by toluene) and the lowest value (8.15). In this study, Span 80 could increase heavy oil C/H ratio, decrease heavy oil viscosity. Span 80 could make the sands surface more hydrophilic, and then the solvent loss would decrease. The oil recovery was high after 10 times recycle use.     

Ultrasound-assisted extraction of Cordyceps cicadae polyphenols: Optimization,LC-MS characterization,antioxidant and DNA damage protection activity evaluation

In this study, ultrasound-assisted extraction of polyphenols from C. cicadae was optimized by response surface methodology (RSM). The optimized conditions were determined as extraction time of 39 min, liquid-to-solid ratio of 1:29 g/mL, extraction temperature of 69 °C and ethanol concentration of 55% with a yield of 21.9 mg gallic acid equivalent/g dry weight. Four resins were used for polyphenol purification. D101 resin had the highest ratio of adsorption and was further applied in polyphenol purification test. A total of 19 different phenolic compounds were identified by LC-MS, including 12 phenolic acids and 7 organic acids. In addition, C. cicadae polyphenols displayed higher antioxidant activity in vitro and anti-aging activity of C. elegans in vivo. Lastly, C. cicadae polyphenols showed the potential to protect DNA from oxidative damage. Overall, our results suggest that polyphenols from C. cicadae may be considered as novel sources of anti-oxidation, anti-aging and recommended as reagents to protect DNA from oxidative damage in food and pharmaceutical industries.     

Simultaneous determination of four sedative-hypnotics in human urine based on dendritic structured magnetic nanomaterials

A magnetic solid-phase extraction technique based on magnetic dendritic structured nanoparticles (Fe₃O₄@SiO₂-NH₂-G5) as adsorbent coupled with ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) has been developed to detect diazepam, midazolam, zolpidem, and zaleplon in human urine. With Fe₃O₄@SiO₂-NH₂ as the central core, dendrimer (G5) grafted alternately with cyanuric chloride and imidazole were bonded to the surface of the core to synthesize Fe₃O₄@SiO₂-NH₂-G5. The morphology and structure of the magnetic materials were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and dynamic light scattering (DLS). The key parameters affecting the extraction efficiency were optimized. A satisfactory performance was obtained under the optimum extraction conditions. The proposed method was validated, and the limits of detection of zaleplon, diazepam, zolpidem, and midazolam were 0.05, 0.05, 0.02, and 0.02 ng mL^?1, respectively. The linear correlation coefficients r of the four analytes were > 0.996, the intra-day precision was between 2.4 % and 9.4 % with the recoveries between 88.3 % and 104.8 %, and the inter-day precision ranged from 3.9 % to 15.2 % with the recovery in the range of 94.1 %?108.3 %. The magnetic dendritic structure nanomaterial Fe₃O₄@SiO₂-NH₂-G5 was successfully used to extract sedative-hypnotic drugs from human urine samples. The Fe₃O₄@SiO₂-NH₂-G5-based magnetic solid-phase extraction method eliminates centrifugation and filtration steps as in conventional extraction. Only one step of vortex dispersion extraction could achieve the separation and purification of the target compounds. The proposed method was simple, rapid, environment-friendly, and suitable for the analysis of sedative-hypnotic drugs in human urine.     

Ni-Al layered double hydroxides electrodeposition from a chloride solution

Ni-Al LDHs was electrodeposited from a NiCl₂-AlCl₃ solution. In order to analyze the electrodeposition process, electrolytes with initial Al content range of 0–20% were used. With increasing Al content in the sample, the preferred orientations of (0 0 3) and (0 0 6), increased crystallinity, and decreased interlayer spacing were observed from the XRD results. A dissolution–recrystallization of (0 0 3) plane was detected among the Ni-Al LDHs from the strongly alkaline solution soaking results, which was found to be conducted easily in high Al-containing samples. The pH of the Al-containing electrolyte was much lower than that of pure NiCl₂ solution because lower pH was needed to start a precipitation reaction in the AlCl₃-NiCl₂ solution. The electrodeposition yield and current efficiency were found to decrease obviously in the electrolytes with initial Al content higher than 10%, which was attributed to the increasing Al content in the sample and diffusion of the complex ions. The electrodeposition pattern was in-situ in the electrolyte initially containing 10% Al, then, it developed toward and off in-situ in electrolytes initially containing 0–10% and 10–20% Al.     

Antioxidant capacity and antibacterial activity from Annona cherimola phytochemicals by ultrasound-assisted extraction and its comparison to conventional methods

In recent years, the food, pharmacy, and cosmetic industries have focused on the search of natural compounds with antimicrobial and antioxidant properties; commonly, these compounds are obtained from Kingdom plantae. The aim of the present work is comparing antibacterial and antioxidant capacity of Annona cherimola Mill leaves, using different extraction methods. The ultrasound assisted extraction technique (UAE) was compared with conventional techniques: Soxhlet and maceration. Water and ethanol were used as solvents for leaves extractions performed with these three methods. The main acetogenins reported in Annona cherimola Mill and Annona muricata L. species were simulated using the functional hybrid B3LYP and to confirm its presence, analysis of the compound composition was performed using FT-IR, UV–Vis and HPLC. Total phenolics (TP) and flavonoids (TF) were determined by spectroscopy techniques and novel Differential Pulse Voltammetry (DPV) electrochemical technique. Total Antioxidant Capacity (TAC) of the extracts was measured, using the DPPH, FRAP and CUPRAC techniques. The highest antioxidant content was found in the Soxhlet water extracts; even so, the UAE technique presented an attractive alternative due to considerable reduction in extraction time, which was greater than 99%, and possible selectivity in compounds extraction. Finally, antibacterial activity of the extracts was evaluated, obtaining the best results against gram-positive bacteria using UAE water extract. In this way, the UAE technique presents an excellent extraction option due to the considerable reduction in time and energy, as well as the increase in antibacterial activity.     

Development of Magnesium Anode-Based Transient Primary Batteries

Biodegradable primary batteries, also known as transient batteries, are essential to realize autonomous biodegradable electronic devices with high performance and advanced functionality. In this work, magnesium, copper, iron, and zinc – metals that exist as trace elements in the human body – were tested as materials for biomedical transient electronic devices. Different full cell combinations of Mg and X (where X = Cu, Fe, and Zn and the anodized form of the metals) with phosphate buffered saline (PBS) as electrolyte were studied. To form the cathodes, metal foils were anodized galvanostatically at a current density of 2.0 mA cm⁻² for 30 mins. Electrochemical measurements were then conducted for each electrode combination to evaluate full cell battery performance. Results showed that the Mg−Cu_anodized chemistry has the highest power density at 0.99 mW/cm². Nominal operating voltages of 1.26 V for the first 0.50 h and 0.63 V for the next 3.7 h were observed for Mg−Cu_anodized which was discharged at a current density of 0.70 mA cm⁻². Among the materials tested, Mg−Cu_anodized exhibited the best discharge performance with an average specific capacity of 2.94 mAh cm⁻², which is comparable to previous reports on transient batteries.     

Aggregation Mode,Host-Guest Chemistry in Water,and Extraction Capability of an Uncharged,Water-Soluble,Liquid Pillar[5]arene Derivative

An uncharged, water-soluble per-ethylene-glycol pillar[5]arene derivative ( 1 ) was synthesized and its aggregation mode, host-guest chemistry in water and extraction ability was explored. Compound 1 is a liquid at room temperature; in water, limited self-aggregation occurred at high concentrations as deduced from diffusion NMR and dynamic light scattering. Compound 1 forms pseudo-rotaxane-like 1 : 1 host-guest complexes with 1,ω-di-substituted alkanes with association constants on the order of 10³–10⁴ m ⁻¹. Interestingly, NMR experiments showed that the guest location relative to the host ring system differs among the different complexes. In proof-of-concept experiments, compound 1 was shown to extract structurally related organic compounds from benzene into water with significant selectivity. Compound 1 , which is a liquid at room temperature and has only limited interactions with its side arms, can, in principle, be regarded as a complement to or as a kind of type I porous liquid.